Buying items in the house or the working space is not an easy task. A lot of research is required before purchasing expensive equipment. The Trane HVAC systems can induce you to spend a fortune to buy. They are expensive because they provide good services.
However, it is problematic when you don’t get it cleaned from time to time. All the AC units have drains, and they have a probability of getting clogged once in their lifecycle. You may have to call for emergency AC repair Alpharetta when the water starts getting clogged in the drain lines or when the ducts and coils of the HVAC are filled with dirt. The only solution to deal with such situations is unclogging your AC.
Significance of unclogging AC
Unclogging the AC drain lines and evaporator coils would mean that the AC is working properly. Often people complain about troubleshooting and improper cooling with Trane HVAC systems; clogging is a major reason behind all this. Hence, clogging solutions for AC would mean that:
- the AC starts cooling properly,
- there is no leakage from the refrigerant, and
- you don’t have to bear the pungent odors coming from compressors.
Damage caused by clogged filters
The clogged filters impose severe dangers for the HVAC system. The lifecycle of AC often gets shortened when you don’t take care of the repairs, replacements, and maintenance of the HVAC system. In the worst-case scenario, if you don’t look out for HVAC repair in Alpharetta, GA, you will have to replace the entire system and get a new one. This may cost you a lot of money.
Solutions for unclogging
There are many solutions for unclogging the AC, but only if you look for it properly. The following solutions can help you to deal with these clogging problems in drain lines and coils:
- Since the drain line is usually found at the end of the AC duct, below the condenser coil, the disconnection of the drain line from AC is a simple solution.
- Combine a wet/dry vacuum to the drain line opening outside your home to collect the dirt from clogging.
- Get the water hose and turn it on to allow the water to flow steadily through the drain line.
- Remove the water hose from the form end of the drain line.
- Ensure that the attachment at the nozzle of the other drain line fits perfectly to avoid leakage.
- Use a vacuum cleaner to pump out any dry dust in the evaporator coils of the HVAC system.
- Apply paper filters at the coils so that all the dirt gets collected at the front area of Trane AC.
We have every solution to deal with clogging problems in HVAC systems. Staton Heating & Air makes sure that you don’t have to deal with repairs alone. Contact our team at 770-667-3992 to get all the unclogging solutions at your doorstep. Now you don’t have to worry about your Trane HVAC systems getting damaged from the clogging because we are here for you.